Kompak Classic Promotor
Trailer specification and options
- 4.2m length
- Width options 1.83m, 2.2m
The original classic exhibition trailer has been in continuous production for over 25 years and although much imitated, it’s never bettered.
The Kompak Classic Promotor is a legend in its own lifetime with hundreds built over the years and most still in use. This exhibition trailer was ahead of its time and is still the most popular today becoming an industry standard.
Whilst the Kompak Promotor has been refined over the years, the original design ethos remains as relevant today as ever being aerodynamic (thanks to Mike Rutherford for the original Mould) and simple to operate, this twin axle trailer is towable by most medium sized cars.
The Kompak Promotor exhibition trailer is a truly multi tasking vehicle able cope with hospitality. You can add the optional fitted galley and seats for sampling, add the removable serving counter, display, add the optional wing panel and head board.
The basic design incorporates a lift up side canopy and head board raised on gas struts, with fold down steps and hand rails.
4.2 metres in length with a width of either 1.83m or 2.2m, the trailer weighs approx 850kgs with a 2000kg gross capacity which gives plenty of payload for product and display material
The Kompak Promotor has a 2400mm wide 2000mm high entrance (see the entrance types guide) and a flat floor but is also available with wheel arches and lower floor.
The Classic Kompak Range of Exhibition, Display and Hospitality Trailers
- Kompak Classic Micro and Mini Promotor - 2.4m to 3.6m small car towable
- Kompak Classic Promotor - 4.2m medium car light commercial towable
- Kompak Classic Maxi Promotor - 5.6m large car or van towable
- The Kompak Grand - 7m
- The Kompak Optima - 9m
