Key features
. One man operation with no heavy lifting or climbing of ladders required
. Only 5 minutes complete set up time for whole unit
. One of the most stylish, aerodynamic trailers on the market
Trailer Specification
This is a close coupled, tandem axle design meeting all current EU and DOT regulations and incorporates full RVLR 1989 approved road lights with 7 pin plug and fog light. The trailer has a complete AL-KO over run braking system.
Running gear:
. SV2.7 AL-KO coupling with integrated hitch lock
. Heavy duty serrated jockey wheel
. 2x 1300kg AL-KO axles
. 4x 12-inch wheels with 155/70/12 tyres (plus one additional spare included)
. 4x adjustable corner steadies with galvanised handle
. Road lights including: led front markers, LED side markers, LED rear markers, Kompak recessed rear clusters, number plate light and tringle reflectors.
Body construction:
. Mild steel flat floor chassis primed and painted.
. Heavy duty mild steel galvanised A-frame
. 14mm GRP faced body panels (smooth white finish), sealed and mechanically fixed with rubber bump-stop surround.
. Assembled by means of structural aluminium milled finish extrusions, bonded and mechanically fixed.
. Front custom Kompak designed aero dynamic fiberglass nose cone
. double skin daylight roof
. 18mm treated plywood floor finished in a heavy duty swirly blue vinyl with sealed, welded edges.
Aperture design:
. Barn door style display panels which fold out alongside the trailer with a 3000mm x 2000mm daylight canopy that lifts with gas sturts from inside the trailer.
. Fully welded aluminium 3mm checker plate steps (2800mm long).
. Raised on gas struts mounted to the roof is a headboard that is operated from the ground without need for ladders which measures 3600mm x 500mm.
. Rear access door measuring 600mm x 2000mm secured with a Yale lock.
. Doors and display panels held in place with aluminium catches for quick and easy installation.
All doors and door frames are constructed with 14mm GRP faced body panels and aluminium extrusions. All fixings and furniture are either stainless steel or galvanised for the best weather protection possible and longevity. Each doorway has a fitted gutter and sponge weather seals surrounding the frames.
Internal:
. Electrical installation wired to accept 240v single phase power. The unit is powered from an IP65 water-resistant 16A bulkhead fitting and a mains board with RCDs and MCBs supplies the unit with double 13A sockets and down lights. All the electrics with be freshly certificated.
. Sealed welded heavy duty vinyl floor
. Smev Sink and tap fitted in front-moulded worktop with refillable water containers below.
. undercounter fridge fitted inside aerodynamic nose cone.
. Bench seating along back and end wall incorporating storage space. Sizes. cushions in blue.
. Centre unit measuring 1300mm x600mm for storage of literature including top leaflet rack.
. Nylop panelled along back wall for quick changeable Velcro branding.
Trailer dimensions:
. 4200mm long, 2115mm wide, 2650mm high in closed transit. When the unit is in its hospitality set up it will fit on a 7m x 3.5m pitch size.
If you have specific requirements for any extra furniture, fittings, apertures or other custom modifications, please contact us for a quote.
All our trailers are fully valeted and serviced before collection.